In-Wall On/Off Switch
The In-Wall On/Off Switch is a Z-wave switches by SATCO Products, Inc.. It works with Home Assistant.
Compatibility
Compatibility data may be incomplete. Useorto indicate whether it matches your experience.
Shop SATCO Products, Inc. on Amazon
Browse current SATCO Products, Inc. smart home products and deals on Amazon.
Featured SATCO Products, Inc. devices
See all →Setup instructions
1. Turn the connected appliance ON/OFF by tapping the switch. Tapping and releasing the upper part of the rocker turns the appliance ON. Tapping and releasing the lower part of the rocker turns the appliance OFF. 2. Add(Include) the module to/from your Z-Wave network with your primary controller. Please refer to the instructions manual of your gateway or remote controller for details and procedures on how these actions can be done. 3. Normally, the sequence is as follows: when the inclusion process is prompted by your primary controller, single click and release the rocker switch to ON or OFF position. The controller should show that the action was successful. If the controller shows it was a fail, repeat the procedure
Frequently asked questions
Is the In-Wall On/Off Switch compatible with Home Assistant?
Yes — the In-Wall On/Off Switch is supported by Z-Wave JS, the modern Z-Wave stack used by Home Assistant. Pair it through the Z-Wave JS UI or the Home Assistant Z-Wave integration. A Z-Wave controller is required.
What protocol does the In-Wall On/Off Switch use?
The In-Wall On/Off Switch communicates over Z-Wave.
Data: zwave
← Back to results